Note:- 2 and 11/16ths inch. NOT 3 and 11/16ths inch. Sorreeeeee..
Simon
From: Simon Lachlan [mailto:simon.lachlan@homecall.co.uk]
Sent: 16 December 2014 13:10
To: 'Healey List'
Subject: Overdrive drain plug
I have a MkII BT7 with the big flat brass plug with square cut-outs.
So, I'm trying to find a tool off the shelf to facilitate the plug's
removal.
Grovelling, flat on my back with my arm extended into the oily darkness, I
measure its width at +/- 68.5mm or 3 and 11/16inches.
Does anyone know its precise size or does anyone have one accessible and be
kind enough to measure it for me?
Incidentally, the discovering the correct name of the tool that I was
seeking initially made my task difficult. It transpires that what I, at
least, am looking for is apparently called a "Hook wrench" or, less often, a
"C-spanner". Now, those terms are apparently what we use in the
UK........what you other guys call them is your own affair!
Simon
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|