Smallblock Chevy ones work just right on the six cylinder engine, although
they are the more modern viton ones that grip on top of the guide. You have to
turn a small amount of the guide down with a special tool, then they push on.
The two problems with fitting proper guide seals to the AH engine are the lack
of space inside the inner valve spring and the lack of clearance between the
underside of the valve cap-top of the guide at full lift, hence the need to
shorten the guide a bit for clearance when fitting SBC seals. This is the tool
I use to fit them http://www.cylinderheadsupply.com/kl1439.html
I have never seen umbrella seals for a Healey, the only ones that I know of
would not fit inside the inner spring.
Andy.
--------------------------------------------
On Tue, 16/12/14, healeymanjim@hansencc.net <healeymanjim@hansencc.net>
wrote:
Subject: [Healeys] seals
To: "healeys@autox.team.net" <healeys@autox.team.net>
Received: Tuesday, 16 December, 2014, 6:05 PM
need some info. who make
umbrella seals that will work on ah valves? checked on
line but cannot find set that will work on healey.
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|