Hi John,
I believe that originally the piping was glued to the aluminium with contact
cement.
I recently installed mine that way and found that it was quite east to get the
piping correctly positioned.
Michael S
BN1 #174
-----Original Message-----
From: "JOHN BAHE SR" <johnbahesr@gmail.com>
Sent: b7/b19/b2014 9:27 AM
To: "healeys@autox.team.net" <healeys@autox.team.net>
Subject: [Healeys] vinyl piping
Anyone have an easy way or best method to install the piping on the
aluminum door finisher that attaches to the shut pillar? Do you have to
remove the trim or can you install with the trim attached but loose? Any
suggestions are appreciated.
Thanks,
John A Bahe Sr.
johnbahesr@gmail.com
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|