Some of my experiences with the hybrid cable:
Nisonger made mine - any speedo shop should be able to. They'll need the
exact length.
I originally made do without the Toyota angle connector on the trans, but
the cable died in a year - too much of a bend exiting the trans.
You may also need your speedo recalibrated to the gear drive in the Toyota
trans. Nisonger has a pdf on how to measure the rotations of the speedo
cable when pushing the car through 52 ft 9-1/2".
IMHO you should also make sure the Toyota trans mount centering bolt is
riding on the leading edge of the hole so the engine won't move forward
under braking.
--
Steve Gerow
Altadena, CA, USA
BN6
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|