healeys
[Top] [All Lists]

Re: [Healeys] Cam break in

To: Healey List <healeys@autox.team.net>
Subject: Re: [Healeys] Cam break in
From: Austin Healey <pajtamuvek@gmail.com>
Date: Tue, 24 Sep 2013 06:38:50 +0200
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <a06240801ce65f1ae294d@192.168.0.16> <001401ceb866$38c0fdb0$aa42f910$@att.net> <CA+QDXmD7_7K8e2vKG2tJUAhr2ku57EwMrhp42Td6MiNngOcfFg@mail.gmail.com> <a06240804ce6645a370c5@192.168.0.16>
Hi Stephen,

10 minutes will be ok. Cam running in is 90% precaution and 10% necessity
on a stock Healey engine. It becames more important if You start with a
higher level of tune with hi lift long duration camshaft profiles, and/or
hi lift geometry rockers.
Although I would change the oil right now after heating the engine up again
with a few minutes running.

Gergo



2013/9/23 Stephen Hutchings <s.hutchings@rogers.com>

> Hi Gergo,
> Thanks for your reply.
> Do you mean it will be OK with 10 minutes, or should I go back and do
> another ten?
> Stephen, BJ8
>
>  Dont worry, i will be ok.
>>
>> Gergo
>>
>>
>> 2013/9/23 Richard J. Hockert <rjhco@att.net>
>>
>>   Break it in with the burnout.......
>>>
>>>  Don't worry about it.
>>>
>>>  Best regards,
>>>  Jim Hockert
>>>  Dallas, TX
>>>
>>>  -----Original Message-----
>>>  From: healeys-bounces@autox.team.net [mailto:
>>>  healeys-bounces@autox.team.net**]
>>>  On Behalf Of Stephen Hutchings
>>>  Sent: Monday, September 23, 2013 8:42 AM
>>>  To: Healey
>>>  Subject: [Healeys] Cam break in
>>>
>>>  I've just reached a biy of a milestone myself, in that I fired up the
>>>  engine
>>>  for the first time in six years, particularly to break in my new cam. I
>>> was
>>>  following the procedure of taking the engine to 2000rpm and keeping it
>>>  there
>>>  for twenty minutes (the rest of the engine is already run in, long
>>>  story)...but I developed a nasty coolant leak and had to shut it down
>>> after
>>>  about ten minutes.
>>>  I think I've sorted the leak, but I'm wondering now whether I should
>>> start
>>>  it up and do the remaining ten minutes.
>>>  The procedure described by Elgin cams can be hard to follow, because
>>> after
>>>  all that time, with newly rebuilt carbs, etc. it doesn't exactly snap to
>>>  2000 rpm and stay there, there is a certain amount of fettling required!
>>>  Once this is done I'm relying on an oil change to flush away the special
>>>  cam
>>>  break in lube.
>>>
>>>  Stephen, BJ8
>>>  $12.75
>>>  Archive: http://www.team.net/archive
>>>  Forums: http://www.team.net/forums
>>>
>>>  Healeys@autox.team.net
>>>  
>>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>>
>>>  Unsubscribe/Manage:
>>>  
>>> http://autox.team.net/mailman/**options/healeys/rjhco@att.net<http://autox.team.net/mailman/options/healeys/rjhco@att.net>
>>>  ______________________________**_________________
>>>  Support Team.Net 
>>> http://www.team.net/donate.**html<http://www.team.net/donate.html>
>>>  Suggested annual donation  $12.75
>>>  Archive: http://www.team.net/archive
>>>  Forums: http://www.team.net/forums
>>>
>>>  Healeys@autox.team.net
>>>  
>>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>>
>>>  Unsubscribe/Manage:
>>>  
>>> http://autox.team.net/mailman/**options/healeys/pajtamuvek@**gmail.com<http://autox.team.net/mailman/options/healeys/pajtamuvek@gmail.com>
>>>
>> ______________________________**_________________
>> Support Team.Net 
>> http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>> options/healeys/s.hutchings@**rogers.com<http://autox.team.net/mailman/options/healeys/s.hutchings@rogers.com>
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>