The Z thermostat gasket is not the same. The hole for the thermostat is the
same size but the distance between the bolt holes is about 1/8" (or more)
with the Healey gasket. Which means you could use a Z gasket in a pinch if
you elongated the holes.
> From: rjhco@att.net
> To: healeys@autox.team.net
> Date: Thu, 19 Sep 2013 22:08:40 -0500
> Subject: [Healeys] Thermostat Gasket
>
> Does a 260 Z thermostat gasket fit the Healey 3000 engine? I heard that
the
> fit is the same?
>
> Checked the archives and did not see any reference. Thanks in advance.
>
> Best regards,
> Jim Hockert
> Dallas, TX
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|