G'day Ira
Can you get a Dremel in there with a small grindstone to put some flats on
it? Then use an open end spanner small enough that you have to tap it onto
the flats.
Cheers
Peter Linn
Brisbane Oz
-----Original Message-----
From: I Erbs
Sent: Monday, September 02, 2013 10:16 AM
To: Ahealey help
Subject: [Healeys] Temp sensor
Bought a flared nut wrench. It broke.
Cut a box end wrench open and in half..
Nut head too rounded. Keeps slipping. Used a 6 point plug socket with slit
cut..and hose clamp.... Still no joy.
Can't file nut as it sits under head piece that overhangs. Can't get vise
grips on for same reason
The $250.00 rebuild solution is looking like the only option after I cut
the capillary tube.
Also tried heat gun....
Ira Erbs
Portland, OR
please excuse typos. Sent from my phone
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|