Check if the needles, float valves, float height and springs in the
carbs are as specified. New carbs can have the wrong needles, float
valves and/or springs fitted and the float height will not be set to
spec in many cases. Also check if the needles are not rubbing the jets,
when lifted the pistons should drop with a very clear click. Also check
the mixture at idle (Colourtune) and the dwell angle instead of the
points gap.
Kees Oudesluijs
NL
Op 27-8-2013 4:54, john spaur schreef:
> Just did at your suggestion; problem persists.
>
> John
>
> At 05:01 PM 8/26/2013 -0700, Brian Drab wrote:
>> Have you tried replacing your condenser....
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|