It could also indicate a faulty coil or condensor... check that first.
On Wed, Aug 14, 2013 at 7:51 AM, Len and/or Marge Hartnett <
thehartnetts@earthlink.net> wrote:
> My BJ8 tach has become erratic (not erotic although the needle is doing a
> great shimmy and shake). In 2004, it was steady but incorrect. I replaced
> the C2 capacitor per article by Frank Filangeri (can be found on John Sim's
> web site) and that solved the inaccuracy problem. Now it fluctuates
> constantly
> by a 100 or 200 rpm. There are two other articles on John's site one of
> which
> (author unknown) recommends replacing virtually every electronic bit and
> piece
> in the tach.
>
> I can not find anything in the archives specific to my current problem so
> therefore my question is: will replacing only the C2 capacitor solve my
> erratic needle problem? Is there something else I should check first? I
> do
> not relish the idea of replacing eleven items one by one and having to
> reassemble and test each time.
>
> (The Other) Len
> Vacaville, CA, USA
> 1967 AH 3000 MkIII, HBJ8L39031
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|