G'day Tim
Is it that simple. In fact all I did was use some left over offcuts from a
desk I made, cut them so that they were 2in tall and narrow enough to fit
between the horizontal suspension post and the round pad of the shock absorber
arm.
Don't let anyone try an complicate matters for you as it's dead simple.
Hoo Roo
Patrick Quinn
Blue Mountains, Australia
-----Original Message-----
From: Tim Davis BN7 [mailto:tld6008@mchsi.com]
Sent: Tuesday, 18 June 2013 11:20 AM
To: Patrick & Caroline Quinn
Cc: caddi5@comcast.net; healeys@autox.team.net
Subject: Re: [Healeys] 2" distance block
" All I did was to cut a small piece of wood to size. "
It can't be that simple.
Tim Davis BN7
----- Original Message -----
From: "Patrick & Caroline Quinn" <p_cquinn@tpg.com.au>
To: caddi5@comcast.net, healeys@autox.team.net
Sent: Monday, June 17, 2013 5:36:14 AM GMT -06:00 US/Canada Central
Subject: Re: [Healeys] 2" distance block
G'day Mitch
Speaking from very recent experience I can tell you that it's 2in from the
horizontal suspension post (where the shock is bolted) and the flat pad of the
shock absorber arm.
All I did was to cut a small piece of wood to size.
Hoo Roo
Patrick Quinn
Blue Mountains, Australia
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of caddi5@comcast.net
Sent: Monday, 17 June 2013 8:06 PM
To: healeys@autox.team.net
Subject: [Healeys] 2" distance block
I am currently beginning work on the front suspension 1966 BJ8
.............What is the actual measurement of this wood block (spacer) is
it 2" tall ??
Thanks
Mitch
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|