Thanks to all who have replied regarding the "M" pistons.
I should mention that I can't read the number on the skirt of the pistons
because they are still in an engine with the head off.
I can see that they are 0.040" OS but am trying to avoid disassembling the
engine further at this stage.
Michael S
On Wed, May 22, 2013 at 2:31 PM, Michael Salter <michaelsalter@gmail.com>wrote:
>
> I have a set of 0.040" oversize 100 pistons that I'm trying to identify.
> These pistons have a smaller bowl than a standard 100 piston the bowl being
> 0.440" deep and 2.75" in diameter.
> Does anyone have a set of "M" pistons and could compare their measurements
> with those above.
>
> Thanks
>
> Michael Salter
>
>
--
Michael Salter
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|