Better to cover all area's with the final coat. Primer is not fully damp
proof and the surface will corrode again after a while. Most certainly
on areas that will not be cleaned frequently or are in moisture traps
e.g. between tire and rim.
Kees Oudesluijs
NL
Op 2-5-2013 14:37, Paul Leeks schreef:
> Hi all
>
> Having had my wheels sand-blasted, I'm about to prime them ahead of
> painting them.
>
> Am I right to assume that I should prime every surface (front, back and
> inside tyre) to protect from rust, but only need to paint front and back
> with the final coat?
>
> Many thanks as always
>
> Paul Leeks
> BN4
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|