Re: [Healeys] BN2 Flooding Problem

[Bob Spidell <bspidell@comcast.net>]

We're on our second fuel tank.  My dad sandblasted the tank prior to painting, 
and we did get some sand contamination 
but we've cleaned the tank, lines and float bowls thoroughly.  Also, we had 
flooding with the previous tank, which we 
had to replace due to a hole in the pickup tube causing fuel pump fibrillation. 
 Fuel pump is stock SU and behaving 
normally, except during flooding when it runs on (that's usually how we know 
it's flooding).

The vent idea is intriguing.  Since it's a 100M the float bowls are vented into 
the cold air box, and are not 
interchangeable. It's always the front carb that floods--if the vent tube is 
plugged could that cause flooding?   How?

Bob




On 3/31/2013 4:03 PM, glemon@neb.rr.com wrote:
> Since you've tried different jets lets focus on other ideas, clean tank and 
> lines? Stock fuel pump? Carb float bowl properly vented?  Greg Lemon
>
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net

*******************************************************************
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys