You can install a 6 cylinder Healey bell housing onto the 100/4
engine to get the hydraulic clutch. You will have a couple of the
bell housing bolts that are off just a little and they can be drilled
out to work.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
Please feel free to view an interview with the Nock's in 2009
Enjoy
www.youtube.com/watch?v=QOTTRYkbQzs
.
.
On Mar 21, 2013, at 4:21 PM, warthodson@aol.com wrote:
> I am considering replacing the 3 speed transmission with OD in my
> BN1 with an
> Austin-Healey 4 speed side shift transmission w/OD. I would also
> like to
> convert from a mechanical to hydraulic clutch. I am not familiar
> with what I
> would need in the way of bell housings, flywheels, etc. to make such a
> conversion and am interested in information on what I will need to
> consider
> when making this change.
> I am not interested any other non-Healey transmissions & yes I know
> this
> conversion will upset some people.
> Gary Hodson
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|