Charlie,
Do yourself a big favor and get a Service Parts List for your car. The
one that I have is for the BN7 and BT7. It shows pretty much every part
with exploded drawings of where they go. It would also help to figure
out the proper fasteners to use, once you have the code to give you all
of the specs of the standard ones.
It was invaluable to me, even though my car was assembled prior to
restoring it.
Charlie
On 3/14/2013 11:19 PM, Charlie Schott wrote:
> Since I bought my Healey completely disassembled, I'm trying to
> establish how the seat rails are attached to the floor pans. I found
> four metal strips, 1 5/8 X 15 with 3 holes for the tee nuts, that are
> corroded beyond use. I've made new ones and I think that they go below
> the floor pan. They also were covered with remnants of tar paper (not
> sure this was original). To add to the confusion, I can't find them in
> the Moss catalog. Also, since the holes in the floor plan are extruded
> upward, the new wood pieces I bought from Moss don't sit flat on the
> floor. Should I pound the floor flat?
> Do the wood pieces sit inside cut outs of the carpet? Are the wood
> pieces bare or painted?
>
> Also, I would appreciate it it someone would tell me how the flat and
> lock washers stack up on the top and the bottom of the rails.
>
> In case you haven't noticed, I have an obsession with originality
> (Hey, that's really the only way to do it). Thanks for your help.
>
> Regards,
>
> Charlie Schott
> ,
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|