So how are you guys installing the "glass"?
I did the rubber and have the new felt to use but found it hard to do with
the lens in place. I have decided to replace the "glass/lexan" as well since
the original is a mess.
Regards,
Richard of KY
BN 7 #440
Sent from iPhone
On Feb 5, 2013, at 18:55, "Per Schoerner" <healeyguy@bredband.net> wrote:
> Derek
> Exactly what I'm doing as well, have done one so far exept for the felt
strip. The felt strip that I have removed was glued in place. Don't know with
what though, but I plan to use some textile glue, similar to contact glue.
>
> Yes, the front is fixed, and must be on the outside. On the early BN4s
though the front one was sliding, but you know that, don't you.
>
> Have you installed new rubber sealing strips? Someone told me some time ago
that this was an impossible task. It took some time, but far from impossible.
I used an old screwdriver that I had bent the tip of a little and filed off
all sharp edges.
>
> Per
>
> Derek Job skrev 2013-02-05 11:00:
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|