It should go through the hole that the rear main harness goes through
(on the left hand side of the rear bulkhead) and then follow the
harness to the rear hoop. At that point it should follow the rear
hoop (tucked up into it) to the switch.
John
At 05:13 PM 12/22/2012 -0800, Charlie Schott wrote:
>Could someone please tell me how the wire at the back of a BT7 that
>goes to the shut-off switch (white/black) is routed along the back
>of the trunk. I know that the RH rear light harness is attached
>with clips, but what about the wire that goes to the cut-off switch. Thanks.
>
>Regards,
>
>Charlie Schott
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys@autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/schottc@knology.net
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys@autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|