Hi all,
I've got the throttle switch out and partially disassembled. It's in two
parts at the moment; the metal shell half and the electrical half. My
question is this; can the part in the metal shelf half, the part that is sort
of a piece of metal on a shaft, can that shaft be taken out also? On the
metal shaft there is a tab bit that the spring hooks to. The little hole in
the tab that the spring hooks to has a groove worn in one side, so, the switch
gets stuck in the overdrive on position. I'd like to take it apart so I could
gently Dremel that hold round again.
Thanks,
Paul B.
100-6 BN4
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|