a while back i rebuilt a PBR servo with parts we got from down under. it works
but doesn't. when you press the pedal, the servo appears to work OK, but then
the pedal rides back up and the servo drops out and you need to push hard to
stop. i thought it would work out after a while, but now i need to go back
into it an make it right. i suspect the air valve, but does anybody have any
ideas. it is simple system, and seems pretty rugged, but something appears to
be sticking. a beer to the winning contestant. hjim
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|