Ira,
I can't imagine how you could replace the box in situ. The rocker shaft has to
be removed from the top and the column has to be withdrawn though the front of
the box and I believe the outer tube is soldered into the box. I gotta believe
you have to R&R the whole column intact, but, someone on this list may know
better.
Bob
--------------------------------
Bob Spidell - San Jose, CA
----- Original Message -----
The non adjust steering box has always leaked. New seal and foam bit did
not help . I just got a replacement column and box( thanks Healeyjim). Any
advice on switching out the box? Should I replace the whole column/ box as
a unit or can I swap out the box alone en situ?
Any advice is appreciated.
I will replace seal and foam bit.
Thanks.
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|