Re: [Healeys] Opinions please >>

[<Josef.Eckert@t-systems.com>]

Can only assume valve got stuck in valve guide. Happens when clearance is not
right after rebuild or bronze guides are used.
Josef Eckert
Konigswinter/Germany

-----Urspr|ngliche Nachricht-----
Von: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net] Im
Auftrag von Robert Blair
Gesendet: Sonntag, 27. Mai 2012 09:16
An: Healey List
Betreff: [Healeys] Opinions please >>

Listers....Saw this recently in my area ...
Does anyone have experience with this problem and what happened and what was
your conclusion???

PROBLEM:
Motor with under 5K miles since full rebuild - never over rev'd.
One pushrod jumped out from rocker ball - expected nasty noises...
Tappet adjustment nut was tight after jump.
Pushrod slightly bent - as expected, but not enough to permit jump.
No follower damage.
No valve or piston damage.
Compression maintained.

SOLUTION:
Replaced pushrod and tappet screw.
Motor runs just fine.

What happened and why?????????
Opinions please ..............

Robert N. Blair  Yellow 65BJ8  RNBmail@yahoo.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net