G'day Christopher
Sounds like a deal to me.
Thanks
Patrick
-----Original Message-----
From: Chris Dimmock [mailto:austin.healey at gmail.com]
Sent: Wednesday, 23 May 2012 8:39 PM
To: Patrick and Caroline Quinn
Cc: <healeys at autox.team.net>
Subject: Re: [Healeys] BJ8 Brake booster fail locks brakes on
Thanks Alan, I'll investigate along those lines. So frustrating!!!
Hey Patrick,
I'll write you an article.
But My brake fluid dripping hands were not in the mood for a camera....
I can include a pic of my BJ8 stopped, which may infer the brakes were
locked on. I can also include a pic of the offending brake booster, which I
didn't assault with a large hammer, because I want to fix it.
Deal?
;-)
Best
Chris
On 23/05/2012, at 8:30 PM, "Patrick and Caroline Quinn"
<p_cquinn at tpg.com.au> wrote:
> G'day Christopher
>
> Yes had the same experience with a Mk2 Jaguar that used to be our everyday
> car. Yes it locked solid on Pennant Hills Road in the middle of peak hour.
I
> was later told that that the booster was the same as a BJ8. I didn't know
of
> course as you would realise I'm from the era when real Austin-Healeys
didn't
> have brake boosters. ;)
>
> Took it to a few so-called Jaguar experts, but most were just that -
> 'sperts'. In the end took it to Better Brakes in Parramatta who said that
it
> was a dooverhicky inside that wasn't letting the fluid return. I took that
> as technical talk for valve. Anyway first of all they actually found the
> booster in the car which is tucked away upside down and underneath the
right
> hand side innerguard and then rebuilt it.
>
> Worked like a charm after that.
>
> Now Christopher as you have experienced a spanner wielding moment with
your
> Austin-Healey it seems to me that you should have taken photos of what you
> have done and we can prepare an article for Flat Clat. What say you?
>
> Hey guys,
> Ever had a BJ8 brake booster fail so it locks your brakes on?
> My brake booster (BJ8 std type) effectively pushed the pedal high, and
> locked
> all the brakes on. Solid
> Pushing hard on the pedal released the brakes, but next time you touched
> them,
> same thing. 4 wheels locked solid.
> This isn't a diagnosis question. I had replaced calipers, hoses, rebuilt
> wheel
> cylinders, rebuilt the brake master cyl, replaced the reseviour with a new
> one, and fitted a rebuilt BJ8 Booster. fitted new linings and shoes. And a
> New
> one way valve in the booster vacuum line.
> Thats when the problem started...
> So I re rebuilt master cylinder. Twice. Checked and double checked
everyting
> Checked the booster one way valve.
> Glimmer of hope was disconnecting the "new" booster. Problem vanished -
but
> no
> booster.
> Today I put my old booster back on. Std BJ8, rebuilt 14 years ago. Brakes
> are
> now perfect again.
> This preventative maintenance has hairs all over it....
> So the question is.... What's wrong with my newly rebuilt BJ8 booster that
> it
> doesn't release the vacuum????
> Ideas?
|