Thought I had discovered why my BJ8 was missing. I had found a stuck pin in
the dist cap and grease on the rotor contact, so cleaned everything up and miss
stopped------for a while--then a little more missing. Replaced the dist cap
and all wires, rotor---ran great for a while then missing. Now missing pretty
bad.
So far:
I have replaced the rotor--no change
Replaced the dist cap--NC
replaced the wires--NC
Replaced the end caps on the wires---NC
Replaced the coil---NC (Lucus Sport)
Havent replaced the Pertronix (10 + years) since, as I understand it, when they
go it is all of a sudden and you get no spark.
Anyone have any ideas as to what to persue next------I hear the FP pumping so
assume there is sufficient fuel to the carbs.
Also---I have checked the float bowls and they have fuel in them and are not
stuck.
Thanks
tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|