Use inline fuses on both lamp circuits as well as the 35 amp oem fuse.
Ira Erbs
IT Consultant
Portland, OR
On Apr 2, 2012 3:51 PM, "Richard Kahn" <tahoehealey at hotmail.com> wrote:
> I have just re-wired the halogen head lamps using relays (2) and I was
> curious
> about the fuses to use. Effectively, I believe they were originally on the
> 35
> amp line so logic would dictate usnig a 35 amp again. Am I correct? As I am
> using an original fuse holder with two fuses, I connected the amp meter
> (mounted permanently below the dash) brown wires to the other fuse
> position.
> Again should this be a 35 amp?
> Thanks in advance,
> Rich Kahn
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com
|