Derek,
It is easy to fit a LED light bulb with a flat top and 9 LED's into a
reflector housing as you can adapt the depth of the plastic LED housing.
I did a similar thing in making daylight running lights for my Jensen
Healey where there was only a small fitting for a 5W bulb available. I
grafted the shaft of a small 5W bulb onto the LED housing using some
ingenuity. The LED light will direct the light straigth to the rear.
They are available in red, amber and white.
Although it is not a discription how to go about it you will find some
pictures to give you some idea.
Kees Oudesluijs
NL
Op 28-3-2012 17:37, Derek Job schreef:
> Hi all
>
> Can someone direct me to any articles which detail the adaptation of the
> reflectors to indicators (not brake lights). I seem to remember this from
> about 5 or 6 years ago and it usues the existing reflector housing with a
> hole cut in the rubber back.
>
> Several firms now sell indicators for the reflector pods but at AH Spares
> for instance they cost 55 pounds each side, which is about 3 or 4 times the
> cost of a normal indicator!
>
> cheers
>
> Derek
> www.healeysix.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs
> at chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.1913 / Virusdatabase: 2114/4898 - datum van uitgifte: 03/27/12
[demime 1.01d removed an attachment of type image/jpeg which had a name of foto
4.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of foto
13.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of foto
14.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of foto
15.JPG]
|