Sorry for the confusion, I meant the splned hubs.
Has anyone used the NAPA bearings, either the NAPA bearing or the NAPA
PROFORMA bearing?
- Tom
On Thu, Mar 15, 2012 at 8:45 PM, Bob Spidell <bspidell at comcast.net> wrote:
> My front wheel bearings have 170K miles and AFAIK they have never been
> replaced. Gone through a couple sets of rear ones, though.
>
> Gotta admit, I thought the original poster was referring to king pins;
> can't believe he'd need new stub axles at less than 70K miles.
>
> Bob
>
>
>
> On 3/15/2012 5:00 PM, Michael Salter wrote:
>
>> With all due respects to the wisdom on the list I would suggest that wheel
>> bearings with 69K miles should be in perfectly useable condition if they
>> have been properly lubricated and kept dry.
>> Careful cleaning and inspection would be necessary but if no faults are
>> found and there are no signs of corrosion or roughness they could be
>> reused
>> with new seals and new lubrication grease.
>> Flame away!!!!
>>
>
>
> --
> ***********************************************************************
> Bob Spidell San Jose, CA bspidell at comcast.net
>
> ***********************************************************************
>
> ______________________________**_________________
> Support Team.Net
> http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/ah3000me@**gmail.com<http://autox.team.net/mailman/options/healeys/ah3000me
> at gmail.com>
|