[Healeys] Winter projects, parts questions

[richchrysler at quickclic.net (Rich Chrysler)]

Hi Bill, Can't help you with the MOMA problem but Nisonger may be able to
help. They are who I use exclusively these days.

The black strip between instrument pos and main fascia panel is simply the
same stuff used between over rider and bumper. You need to notch out the
inside edge for each of the welded tabs, and the joint is done at the top
just to the outboard side where the cockpit rail hides it.

The bracket for the prop rod on the alloy boot lid is a small steel box like
affair with an elongated ear as the bracket. It is screwed to the left edge
of the alloy skin with two screws and there is usually a sandwich of black
butyl packing strip between the underside of the box section and the lid
skin.

Pictures attached.

Rich

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of WILLIAM B LAWRENCE
Sent: 2012-01-19 10:20
To: healeys at autox.team.net
Subject: [Healeys] Winter projects, parts questions

I'm doing some detail work on my BN1 and need some information on some
parts.

A while back someone mentioned a source for the correct tach and speedo
faces.
The ones MOMA put on 10 years ago are reacting to the sunlight and turning
purple where not shaded by the needle.

Does anyone know of a source for the vinyl strip that goes between the gauge
binnacle and the dash panel on the two piece dashboard? Mine as stiff and
allows the two pieces to resonate.

I got some good information about the prop rod bracket for the boot lid.
However it would help if I could get some measurements to fabricate one.

Thanks in advance for the help.

Bill Lawrence
BN1 554
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
023.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
017.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
019.JPG]