Brad -
If it is a '63 shroud, that means it is from a BJ7. This shroud will
be shorter because the dash is different on a BJ7.
If it's a '64, then it's probably from a BJ8 (unless it's a US model
year '64, then it could be from a BJ7). All BJ8 shrouds are the same
length and size, the only difference is an additional mount for the
separate parking / indicator light on the front shroud, other than
that they should be identical.
By the way, let me know if you would be willing to sell the left front
quarter of the shroud to me after you are done chopping up your
shrouds. At some point on my BJ8 this part was replaced with a clip
from a BT7 or BN6 and the grill openings and the part above the grill
are different on the earlier sixes.
Best,
Alan
On Tue, Jan 3, 2012 at 9:24 AM, Attean Lake Lodge <info@atteanlodge.com>
wrote:
> Dear Healey Helpers,
>
> May the elite among you advise if there was a difference in the shroud
> size,mainly the length between my 67 and say a 63 or 64? My body man says
> there is and I am not sure I trust him anymore, final fitting is becoming a
> major issue. Many thanks.
>
> Brad Holden
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|