Use some cotton string. Make a punch by flattening the point of a framing
nail. Feed the string into the hole using the nail as a punch to compact the
string. When the hole is full, put a dab of silicone on top.
Richard Mayor
BN7L-466 Vintage Racer
Portland, Oregon
> From: richchrysler at quickclic.net
> To: jmsdarch at sbcglobal.net; healeys at autox.team.net
> Date: Sun, 27 Nov 2011 11:37:50 -0500
> Subject: Re: [Healeys] Main bearing cap felt seals
>
> Autofarm usually has these in stock.
>
> Rich
>
> -----Original Message-----
> From: healeys-bounces at autox.team.net
[mailto:healeys-bounces at autox.team.net]
> On Behalf Of john spaur
> Sent: 2011-11-26 10:31
> To: healeys at autox.team.net
> Subject: [Healeys] Main bearing cap felt seals
>
> I noticed the Moss catalog does not have the main bearing cap felt
> seals. I have three but I need four.
>
> What are people using to replace the seals?
>
> Thank you,
> John
> '62 BT7
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard at hotmail.com
|