Is this a two pack epoxy? If so it sounds like you didn't mix it well
enough and part of it didn't get enough of the fixing agent/hardner.
You can try spraying some fixer on it, or alternatively you can put
the whole business in an oven for a couple hours at around 250 or so.
You will need to replace the seals if you do this.
On 10/2/11, john spaur <jmsdarch@sbcglobal.net> wrote:
> I painted my transmission 6 days ago with epoxy primer. It is a
> little tacky in places and does not seem to have dried properly. Is
> this normal and can it be painted with engine enamel or do I need to
> remove it and prime it again?
>
> Thanks,
> John
> San Jose
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|