The old ones may have contained asbestos, possibly fitted as NOS. These
hardly ever squealed. The new ones are probably modern pattern parts
and are asbestos free. These are know to squeal in many instances. You
can try to chamfer the edges.
Also use some copper grease on the sliding surfaces of the pad/calliper
and on the back of the pad/anti squeal shims. Make sure you do not
contaminate the friction material or the brake disc.
Kees Oudesluijs
NL
Op 29-9-2011 3:37, Kenny J schreef:
> About a year ago I replaced my front brakes with new rotors and pads. I also
> installed the antil-squeal
>
> shims. I never had a problem with my brakes squealing before installing the
> new brakes. After the installation, my brakes began to (and continue to)
> squeal. Any suggestions? Kenny'61 BT7
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs
> at chello.nl
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.1809 / Virusdatabase: 2085/4523 - datum van uitgifte: 09/27/11
|