Same here on my BJ8. No problems at all after conversion.
On Wed, Jul 27, 2011 at 11:58 PM, Bob Spidell <bspidell at comcast.net> wrote:
> A data point:
>
> I have a pre-2001 Smiths tach with positive-ground Pertronix ignition on my
> BJ8. I calibrated the tach against a Craftsmen dwell/tach, and
> double-checked RPM and MPH with my 3.54 rearend and 185/70R15 tires. The
> tach is absolutely dead-nuts on and rock solid at all engine speeds (I did
> have to reverse the inductive pickup loop on the back, not surprisingly).
>
> I've often wished I could get an electronic speedometer.
>
> Bob
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
> ----- Original Message -----
> From: warthodson at aol.com
> To: healeys at autox.team.net
> Sent: Wednesday, July 27, 2011 8:00:59 AM
> Subject: [Healeys] Smiths Tach Conversion
>
> Recently, we have been told by Nisonger that that Smiths electronic tachs
> may
> malfunction when connected to a distributor using a Pertronix ignition.
> ...
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
|