Bolts are exact same diameter of the 6 cyl cars dowel bolts, but BSF.
The head is different too (it's rounded with two flats I think).
If you have the restoration notes from the Austin Healey Club
magazine, by Roger Moment and others, there's an installment by Rich
Chrysler (possibly #25 or so) which has pictures of this bolt and all
specs.
These articles are downloadable from the club website. Arguably the
most valuable set of articles ever written for our marque, and only
available if you are a club member.
Alan
On 7/14/11, warthodson at aol.com <warthodson at aol.com> wrote:
> At our local club meeting last night, a member was inquiring about a source
> for the two transmission bellhousing dowel bolts for a BN1. I would like to
> know the size of these bolts (specifications), OE part # & a source, if
> available.
> Thanks,
> Gary Hodson
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>
--
Sent from my mobile device
|