healeys
[Top] [All Lists]

Re: [Healeys] Corrosion on carburetor piston tube

To: John Morrison <slomo100@sisna.com>, healeys@autox.team.net
Subject: Re: [Healeys] Corrosion on carburetor piston tube
From: José Vicente Vargas <jvvmusme@yahoo.com>
Date: Tue, 5 Jul 2011 12:58:41 -0700 (PDT)
Joe Curto ??
 Josi Vicente Vargas
Musmi


Tel. (571) 321 3740
Cel. (57) 311
288 3401
Skype: jovivago


www.musme.net


Bogota, Colombia
________________________________
From: John Morrison <slomo100@sisna.com>
To:
healeys@autox.team.net
Sent: Tue, July 5, 2011 2:25:23 PM
Subject: [Healeys]
Corrosion on carburetor piston tube

All,

I have a 100M carburetor that has
just been rebuilt.  Problem is that
the rebuild found a problem with one of
the pistons.  It has had some
corrosion on the follower so a set of chambers
and pistons were
substituted from a TR.

The chambers from the TR will work
but they are not correct for the 100M.

Is there a carb rebuilder out there
that can replace and fit the corroded tube?

John Morrison
100M
BN7
_______________________________________________
Healeys@autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>