Derek, brown is horn, circuit is completed to ground no extra wire, other
three are turn signal, solid green should be power, then routes to green
with xx or green with yy through the control head to operate blinkers,
careful here, don't pinch anything when you shove it all back in, and make
sure all the connectors are screwed down tight, not a job you want to repeat
over and over again, nor do you want to hit metal and melt the thing.
from Patton Dickson's website:
http://www.austin-healeys.com/downloads/100-6diagram.jpg don't think the
control head wiring changed.
Greg Lemon
----- Original Message -----
From: "Derek Job" <derek.c.job at gmail.com>
To: "Forum" <Healeys at autox.team.net>
Sent: Wednesday, June 08, 2011 2:06 PM
Subject: [Healeys] Help re installation of Moto-Lita wheel AND horn push on
adjustable column.
> Guys
>
> I began the installation today. Unscrewed the jammed plastic locking
> wheel.
> CLOCKWISE. - Ok
> Removed setscrews - eventually! Only one was an actual set screw and that
> was jammed! - Ok
> Dismantled trafficator -ok - Except for the last part that seemed
> impossible
> to access! Cursed the designer and gave up!
>
> After returning home (its a 50km round trip) and consulting web archives I
> learn't that you have to rotate an access plate underneath to expose the
> screws that will allow it all to come apart and expose the wiring at the
> steering wheel end. Thats for tomorrow - and I'd like to get the whole job
> done on this visit.
>
> So I have questions regarding the re- wiring.
>
> My car already has a working indicator switch on the dashbord but I was
> able
> to look through the holes in the trafficator base and see that that there
> are still four wires connected to it. I'm assuming two for the horn and
> two
> for the indicators (I dont have access to a wiring diagram, all that stuff
> is still in storage). That might mean the indicator wires aren't connected
> at the steering box end. Or they still might be! But Im pretty sure the
> trafficator could no longer operate my indicators. I hope to be able to
> have
> access to a lift tomorrow which will give me a better view of whats
> happening down there.
>
> I looked at the Moto Lita horn push and it seemed to have only one
> connection terminal? Do both horn wires go on this terminal? The wheel and
> boss are with the car so I can't have another look.tonight to confirm.
>
> Looking for answers before I set off for the car early Brussels time
> tomorrow. I don't want to let the smoke out!
>
> Sorry to push you guys!
>
> Derek
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/glemon at neb.rr.com
|
