Hi Bob.
Let me expand on that.
I don't think you are getting enough fuel at the carbs. Which could be
due to a wrong/ faulty pump (me), crushed line (Rich) or blocked
filter/gauze screen (Ira) - same result, not enough fuel.
To check, disconnect your fuel line at the carbs, turn on the ignition
& start pumping fuel into an appropriate container for a timed
interval e.g. 1minute.
If you have a e.g. Sprite or 100/4 type SU pump (usually rated at 7
or 8 imperial gallons per hour), you should have around half a litre
of fuel in your container in one minute.
If you have a late type BJ8 SU pump (usually rated at 12 - 15 imperial
gallons/ hr, depending on model) you should have around 1 litre of
fuel - under or over, depending on 12 or 15 gph - in your container in
1 minute.
If you have a double ended SU pump (usually rated at 30 imp gallons/
hr) you should have over 2 litres of fuel in your container in one
minute.
In our tests, at full throttle, my Healey can consume over a litre of
fuel per minute, and can run quite happily on one end of the double
ended SU on the road (I.e. 15 imp gals/hr)
Your mileage may vary.....
Test your fuel delivery volume first. It's cheap & easy. And if the
filters are clean, and the line isn't crushed, but you arent getting
closer to a litre a minute, then maybe try upgrading your pump.
Chris
Sent from my iPhone
On 16/06/2011, at 9:41 AM, I Erbs <eyera3@gmail.com> wrote:
> I know it was said before, but check for dirty fuel filter of carb
> screens if fited
>
> On Wed, Jun 15, 2011 at 4:16 PM, Chris Dimmock <austin.healey@gmail.com
> > wrote:
> Hi Bob,
> Check your fuel delivery volume. I.e. How much fuel your pump
> delivers per minute. I had the same issue with a Sprite once. Turned
> out to be a weak fuel pump.....
> http://www.myaustinhealey.com/austin_healey_technical_articles.html
> Best.
> Chris
>
> Sent from my iPhone
>
> On 16/06/2011, at 3:00 AM, Bob Spidell <bspidell@comcast.net> wrote:
>
> I noticed on my most recent long road trip that my BJ8 seemed to be
> running out of HP and/or torque on long uphill grades. I seem to get
> to about 4K RPM then the engine won't rev any more (yes, I downshift
> as required--it just seems the engine should be able to rev a bit more
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|