Yes ! But my concern is after the overflow pipe....
Is the order overflow pipe, bracket, aliminuim washer, nut
Or is it
Overflow pipe, aluminium washer, bracket, nut
Sent from my iPad
On May 31, 2011, at 1:17 AM, Alan Seigrist <healey.nut at gmail.com> wrote:
> Jose -
>
> Correct! The fibre washer with the funny slots is on the bottom, and the
aluminum one goes on top. You need the fibre slotted one at the bottom so
that your float bowl doesn't become pressurized when you turn the fuel pump
on! You will get fuel spraying out of your carb like a fuel injector!
>
> Cheers,
>
> Alan
>
> On Tue, May 31, 2011 at 1:20 PM, Jose Vicente Vargas <jvvmusme at yahoo.com>
wrote:
> What is the correct order of the washers in the float bowl...?
>
> I have float boal lid, red fiber washer, overflow pipe, bracket, aluminium
> washer, nut.
>
> Is this correct ?
>
>
> Sent from my iPad
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
|