I have 185/70 Verdestein tyres
Adjustable bushings for camber caster
-
slightly larger (7/8") anti roll bar kit,
I set the busshings with the hole
looking completely towards the engine, as
specified in the Moss Motors
instructions and at the tyre shop after riding the
car for about 50 miles I
got a reading of 0 degrees.
The toe in/out I adjusted as indicated in the
manual.
The handling in the car is superb. I have already rode the car 1000
Kms in the
last 3 weeks in multiple testins and the handling is fantastic.
O
Jose
Josi Vicente Vargas
Musmi
Tel. (571) 321 3740
Cel. (57) 311 288 3401
Skype: jovivago
www.musme.net
Bogota, Colombia
________________________________
From: Tadeusz Malkiewicz
<tadeusz.malkiewicz at gmail.com>
To: healeys at autox.team.net
Sent: Mon, May 30,
2011 1:10:21 PM
Subject: [Healeys] Suspension settings for BN2
Hello,
I
need to set-up my suspension (camber, toe-in/out) on my BN2. I am
wondering if
anyone knowledgeable could recommend any settings. I have
standard setup
except for:
- slightly larger (7/8") anti roll bar kit,
- 180R15 Michelin
XAS tyres
- Kilmartin adjustable front shock mounts
Many thanks, Tadek
_______________________________________________
Healeys at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme at yahoo.com
|