I think these are all made by Autosparks in the UK. Even 20 years ago
when I got my BJ8 harness, the wire was too short.
At some point they moved the fuel pump to the right hand side for
safety reasons. Also, doing this eliminated vapor lock problems on
hot days. The harness makers never updated their patterns for this,
for some reason.
On 3/24/11, john spaur <jmsdarch at sbcglobal.net> wrote:
> Evidently all of the BT7 rear wiring harnesses from British Wiring
> (sourced from Britain) are made for cars with the fuel pump on the left
> side.
>
> John
> '62 BT7 with fuel pump on the right side.
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>
--
Sent from my mobile device
|