I had a tr6 cap once but it wouldn't fit on my dm6 distributor. That cap
only seems to fit the later
distributors.
Mark
----- Original Message -----
From: "Alan Seigrist" <healey.nut at gmail.com>
To: <healeymanjim at hansencc.net>; <healeys at autox.team.net>
Sent: Saturday, March 12, 2011 9:52 PM
Subject: Re: [Healeys] wire core plugwire
> It's better to use the TR6 cap with pre made suppression core wires.
> That's how you get the suppression core wire to last if you want to
> use them.
>
> Carbon core wires never last very long in the original Lucas cap
> because the wires aren't designed to work with a pointed male screw
> terminal.
>
> Alan
>
> On 3/13/11, healeymanjim at hansencc.net <healeymanjim at hansencc.net> wrote:
>> i have always had wire center plugwires. i assume that is why i have a
>> lot
>> of static on my radio, but then it has static even when the motor is off.
>> aren't most carbon center wires too big for the distributor cap openings?
>> hjim
>> _______________________________________________
>> Healeys at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>>
>
> --
> Sent from my mobile device
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/lapierrem at sbcglobal.net
|