I got the steering box back from the powder coater today.
The solder did melt but it did not fail or come apart. I can tell
because there are a couple of solder drops on the outside of the
powder coating at the joint.
The powder specification was 400 degrees Fahrenheit for 10 minutes
although the temperature can vary up and down a few degrees.
John
'62 BT7
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|