healeys
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Healeys] Seat belt webbing

from [Oudesluys] [Permanent Link][Original]
To: Bob Spidell <bspidell@comcast.net>
Subject: Re: [Healeys] Seat belt webbing
From: Oudesluys <coudesluijs@chello.nl>
Date: Tue, 01 Mar 2011 17:38:07 +0100 
The bolts through the sheet  metal should be fitted with special 
spreader plates about 3mm thick and about 2"x1" in size. Usually a nut 
is welded to it. A large washer is not enough.
I have always been surprised that that is enough to hold about 20kN. It 
will deform but not pull through.
Kees Oudesluijs
NL

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
coudesluijs.vcf]
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Healeys] Seat belt webbing, Austin Healey
Next by Date:  [Healeys] Seat belt webbing, Oudesluys
Previous by Thread:  [Healeys] Seat belt webbing, Austin Healey
Next by Thread:  [Healeys] Seat belt webbing, Oudesluys
Indexes:  [Date] [Thread] [Top] [All Lists]