The tube are interchangable from the non adjustable to the adjustable
all you need to do is shorten the tube and the solder it in place.
Then to assure that is is sealed put a little silicone around the
joint prior to painting. The tubes also can usually be straightened
by putting the box in a vice and with an assistant heating the tube
where the bend is and then bending back to straight.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Feb 17, 2011, at 7:11 PM, <healeymanjim at hansencc.net> wrote:
> does anyone have an old adjustable steering gear box, minus the
> guts, they would sell cheap. got a bj8 that has had steering
> problems forever and finally took the box out and the housing tube
> has been bent, causing a binding. contact me off list if you can
> help. hjim
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc at sbcglobal.net
|