Rich,
Great pictures; they help a lot and with more than just the hydraulic
lines. I will put the master cylinders and reservoir in place later
today and then I can use a coat hanger to mock up the lines and then
measure them.
John
At 07:31 AM 2/8/2011 -0500, you wrote:
>John,
>
>Sorry, I don't have the dimensions right now but these pictures will show
>the positioning of the lines. Also note the double winged hold down clip
>part way along the lines. I always have new ones made by Doug Reid (Mr.
>Finespanner) along with all my brake and clutch line needs. They are
>preformed and always fit perfectly.
>
>Rich
>
>-----Original Message-----
>From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
>autox.team.net]
>On Behalf Of john spaur
>Sent: Monday, February 07, 2011 9:48 PM
>To: healeys at autox.team.net
>Subject: [Healeys] Master cylinder Brake and Clutch Line Length
>
>If someone knows the lengths of the brake and clutch lines, for a
>1962 MKII BT7, from the reservoir to the master cylinders would you
>please post the information.
>
>In addition if you have a photo of the shape of the lines I would
>appreciate that too.
>
>Thank you,
>John Spaur
>_______________________________________________
>Healeys at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net
>
>
>
>__________ Information from ESET Smart Security, version of virus
>signature database 5856 (20110208) __________
>
>The message was checked by ESET Smart Security.
>
>http://www.eset.com
|