Steve, I have a design [for the BJ8 - could be adjusted for any 6 cyl] that
does drill thru the splash panel/valence, and uses 2 simple alu machined or
steel bent brackets over and under the panel attached to the bumper irons to
fully stabilize the lamps and avoid valance wobble. Easy to drill and fit.
Looks great. I believe John Simms put my simple 3D dwgs on his web site. If
you cannot find them I can send them with a pic of my lamps [7 inch Marchals]
on the car direct if you wish.
Robert N. Blair Yellow 65BJ8 RNBmail at yahoo.com
--- On Wed, 1/26/11, Steve B. Gerow <steveg at abrazosdata.com> wrote:
> From: Steve B. Gerow <steveg at abrazosdata.com>
> Subject: [Healeys] Driving Light Brackets
> To: "healeys at autox.team.net" <healeys at autox.team.net>
> Date: Wednesday, January 26, 2011, 12:16 PM
> Would like to know if anyone sells or
> has a design for driving light brackets which would fit with
> the bumper and apron without drilling holes in the apron.
> I'm thinking of a design which curves up between the rear
> edge of the bumper and the front edge of the apron.
>
> Not interested in the badge bar solution.
>
> Thanks in advance for any actual designs. I can design one
> myself but would prefer to buy it.
>
>
> --
> Steve Gerow
> Altadena, CA
> BN6
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rnbmail at yahoo.com
|