John,
They are designed to be reused. But if you need to replace them, modern
equivalents are "Aerotight Nuts"
[image: P) Aerotight Aerotite
Nuts]<http://www.orbitalfasteners.co.uk/products/P--Aerotight-Aerotite-Nuts-3096/1.html>
*P) Aerotight Aerotite
Nuts*<http://www.orbitalfasteners.co.uk/products/P--Aerotight-Aerotite-Nuts-3096/1.html>
Steel Self Locking Nut
Curt
On Mon, Jan 17, 2011 at 6:20 PM, john spaur <jmsdarch at sbcglobal.net> wrote:
> Some of the locknuts are slotted with two horizontal cuts parallel to the
> top of the nut and partially cut through the thread area. With a little web
> research I found that these can be reused a number of times.
>
> Are people reusing this type of lock nut?
>
> TIA,
> John
> San Jose, CA
> '62 BT7
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt at gmail.com
|