[Healeys] 3.54 Gear Set - Pumpkin Stamping

Subject:	[Healeys] 3.54 Gear Set - Pumpkin Stamping
From:	jmsdarch at sbcglobal.net (john spaur)
Date:	Wed, 12 Jan 2011 21:41:53 -0800
References:	<509BC2D7DDE4497FB8C00E0AF3AFCC9A@GalePC>

Are people remembering to sand out the 11/43 stamping and to replace 
it with 11/39? The axle housing is stamped too but I did not change 
that; only the stamping on the diff.

John
'62 BT7

<Prev in Thread]	Current Thread	[Next in Thread>
[Healeys] 3.54 Gear Set - Pumpkin Stamping, john spaur [Healeys] 3.54 Gear Set - Pumpkin Stamping, john spaur <= Re: [Healeys] 3.54 Gear Set - Pumpkin Stamping, BJ8 Healeys [Healeys] 3.54 Gear Set - Pumpkin Stamping, BJ8 Healeys Re: [Healeys] 3.54 Gear Set - Pumpkin Stamping, pennell [Healeys] 3.54 Gear Set - Pumpkin Stamping, pennell at cox.net Re: [Healeys] 3.54 Gear Set - Pumpkin Stamping, john spaur [Healeys] 3.54 Gear Set - Pumpkin Stamping, john spaur Re: [Healeys] 3.54 Gear Set - Pumpkin Stamping, Mark LaPierre [Healeys] 3.54 Gear Set - Pumpkin Stamping, Mark LaPierre Re: [Healeys] 3.54 Gear Set - Pumpkin Stamping, BJ8 Healeys [Healeys] 3.54 Gear Set - Pumpkin Stamping, BJ8 Healeys

Previous by Date:	[Healeys] 3.54 Gear Set - Pumpkin Stamping, john spaur
Next by Date:	Re: [Healeys] Rear axle Shims, john spaur
Previous by Thread:	[Healeys] 3.54 Gear Set - Pumpkin Stamping, john spaur
Next by Thread:	Re: [Healeys] 3.54 Gear Set - Pumpkin Stamping, BJ8 Healeys
Indexes:	[Date] [Thread] [Top] [All Lists]