Steve: Before I installed my badge bar which has the mounting points for my
auxiliary lights, I had the lights mounted on sort of "L" shaped brackets.
They mounted just like the badge bar does - down between the splash pan and
bumper. Instead of being welded to the badge bar, they bent back parallel to
the splash pan and were just high enough to allow the securing of the light
with its bottom nut/bolt. They could be secured with either the bumper
bracket bolts or overrider bolts depending on what spacing you wanted. They
were very heavy duty and I do not recall ever having a problem with
vibration. Don't know where I acquired them and don't know where they are
right now. If I find them, I'll send you a picture.
(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
From: "Steve B. Gerow" <steveg@abrazosdata.com>
To: <healeys@autox.team.net>
Sent: Wednesday, January 26, 2011 12:16 PM
Subject: [Healeys] Driving Light Brackets
> Would like to know if anyone sells or has a design for driving light
> brackets which would fit with the bumper and apron without drilling holes
> in the apron. I'm thinking of a design which curves up between the rear
> edge of the bumper and the front edge of the apron.
>
> Not interested in the badge bar solution.
>
> Thanks in advance for any actual designs. I can design one myself but
> would prefer to buy it.
>
>
> --
> Steve Gerow
> Altadena, CA
> BN6
> _______________________________________________
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|