healeys
[Top] [All Lists]

[Healeys] Armrest pad shape

To: <healeys@autox.team.net>
Subject: [Healeys] Armrest pad shape
From: "Peter Svilans" <peter.svilans@rogers.com>
Date: Sun, 23 Jan 2011 20:41:45 -0500
John,

Yes, those dimensions are correct.  The wide end goes to the front.

For location on the tunnel carpet,  the front edge of the armrest pad sits 1
3/4" back of the ashtray.  The left side of the pad is 1/4" from, and parallel
to, the seam joining the two tunnel carpet pieces.  This means the centreline
of the middle pleat does not line up with the centre of the ashtray, but is
offset to the right a bit.

By the way, the original pads were only 3/4" thick Dunlopillo foam rubber, not
the 1" or even more often seen in kits.

Best regards,
Peter
Concours Advisory Committee
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>