Jonas -
You definitely don't want to use teflon tape on your brake system, it
can be a safety risk. You should have proper seal at the unions.
Two questions:
1). Did you replace the brake lines?
2) Can you walk us through step by step how you are working the pedal
and bleed nipple when bleeding?
Thanks,
Alan
On 12/29/10, Jonas Payne <JPayne@thorcon.net> wrote:
> Have been suffering from soft pedal since a full brake system re-do over
> the summer. Replaced servo, master calipers. Rears were good.
>
> Am trying to bleed now, and am getting no pedal with the vaccum at the
> servo discharged, and am getting a steady stream of bubbles from the
> driver side bleeder. No air came out of any of the others.
>
> Have wrapped bleed screw with teflon to try to eliminate air from
> getting in around the threads.
>
> Pedal gets firm when engine is running.
>
> I don't have a bleeder system/mitevac/pressurization thing.
>
> Any suggestions?
>
>
> Jonas Payne
> PBR
> Cell: (702) 358-5084
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|